Panco P1 Official Stock Firmware Flash File whitout password
If you note that any of the hyperlinks furnished below is broken or doesn’t work, please put up in remarks area therefore we have a tendency to have a tendency to mend and update it ASAP.
FIRMWARE INFO & DOWNLOAD
System Version: p1-160727
Android Version: Android 5.1
Release Date: 2016-07-26
File Content: Firmware, Flashtool, and Driver
Size: 464 MB
Firmware Link – Download
HOW TO FLASH WITH SP FLASHTOOL
Step 1.
Download and install drivers for your device. If you can’t find your device driver, us this guide to download and install the driver.
Step 2.
Download Sp Flashtool and the your phone’s firmware package. (Firmware list)
Step 3.
Extract Sp FlashTool and your firmware package to different folders.
Step 4.
Open SP FlashTool folder and launch SP Flashtool.exe as Administrator.
Step 5.
Click on Scatter-loading, browse and select scatter file from the folder you extracted the downloaded firmware. (e.g, MTk_Android_scatter.txt)
Step 6.
Click on Download and connect the device to PC via USB cable. Device must be turned off, before attaching to pc.
Step 7.
Once the device is connected to PC, a progress bar will start loading. Wait for it to complete. A green circle with Ok should popup to indicate completion.
Step 8.
Disconnect the device and perform a factory reset before you power on fully. Done
HOW TO FLASH PANCO P1
Step 1: Smart phone Downloads and extract the Panco P1 stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install the provided USB Driver on your Computer if in case USB Driver is already installed, SKIP this step).
Step 4: Follow the How-to Flash Guide to Flash the Firmware on your Panco P1
BACKUP THIS FILE
the firmware file fix bootlop software error update error hang logo and dead issue.
About GSM TECH BD
No comments